Perform a vulnerability assessment of all endpoints in your network using Cortex XSIAM. This includes CVE, endpoint, and application analysis.
Cortex XSIAM vulnerability assessment enables you to identify and quantify the security vulnerabilities on an endpoint. After evaluating the risks to which each endpoint is exposed and the vulnerability status of an installed application in your network, you can mitigate and patch these vulnerabilities on all the endpoints in your organization.
For a comprehensive understanding of the vulnerability severity, Cortex XSIAM retrieves the latest data for each Common Vulnerabilities and Exposures (CVE) from the NIST National Vulnerability Database, including CVE severity and metrics.
Danger
The following are prerequisites for Cortex XSIAM to perform a vulnerability assessment of your endpoints.
Requirement | Description |
---|---|
Licenses and Add-ons |
|
Supported Platforms |
If Cortex XSIAM doesn't match any CVE to its corresponding application, an error message is displayed, "No CVEs Found". |
Setup and Permissions |
|
Limitations | Cortex XSIAM calculates CVEs for applications according to the application version, and not according to application build numbers. |
The Enhanced Vulnerability Assessment mode uses an advanced algorithm to collect extensive details on CVEs from comprehensive databases and to produce an in-depth analysis of the endpoint vulnerabilities. Turn on the Enhanced Vulnerability Assessment mode from Settings → Configurations → Vulnerability Assessment. This option may be disabled for the first few days after updating Cortex XSIAM as the Enhanced Vulnerability Assessment engine is initialized.
Danger
The following are prerequisites for Cortex XSIAM to perform an Enhanced Vulnerability Assessment of your endpoints.
Requirement | Description |
---|---|
Licenses and Add-ons |
|
Supported Platforms |
|
Setup and Permissions | Ensure Host Inventory Data Collection is enabled for your Cortex XDR agent. |
Limitations |
|
You can access the Vulnerability Assessment panel from Assets → Vulnerability Assessment.
Collecting the initial data from all endpoints in your network could take up to 6 hours. After that, Cortex XSIAM initiates periodical recalculations to rescan the endpoints and retrieve the updated data. If at any point you want to force data recalculation, click Recalculate. The recalculation performed by any user on a tenant updates the list displayed to every user on the same tenant.
To evaluate the extent and severity of each CVE across your endpoints, you can drill down into each CVE in Cortex XSIAM and view all the endpoints and applications in your environment that are impacted by the CVE. Cortex XSIAM retrieves the latest information from the NIST public database. From Assets → Host Insights → Vulnerability Assessment, select CVEs on the upper-right bar. This information is also available in the va_cves dataset, which you can use to build queries in XQL Search.
If you have the Identity Threat Module enabled, you can also view the CVE analysis in the Host Risk View. To do so, from Assets → Asset Scores, select the Hosts tab, right click on any endpoint, and select Open Host Risk View.
For each vulnerability, Cortex XSIAM displays the following default and optional values.
Value | Description |
---|---|
Affected endpoints | The number of endpoints that are currently affected by this CVE. For excluded CVEs, the affected endpoints are N/A. |
Applications | The names of the applications affected by this CVE. |
CVE | The name of the CVE. TipYou can click each individual CVE to view in-depth details about it on a panel that appears on the right. |
Description | The general NIST description of the CVE. |
Excluded | Indicates whether this CVE is excluded from all endpoint and application views and filters, and from all Host Insights widgets. |
Platforms | The name and version of the operating system affected by this CVE. |
Severity | The severity level (Critical, High, Medium, or Low) of the CVE as ranked in the NIST database. |
Severity score | The CVE severity score is based on the NIST Common Vulnerability Scoring System (CVSS). Click the score to see the full CVSS description. |
You can perform the following actions from Cortex XSIAM as you analyze the existing vulnerabilities:
View CVE details—Left-click the CVE to view in-depth details about it on a panel that appears on the right. Use the in-panel links as needed.
View a complete list of all endpoints in your network that are impacted by a CVE—Right-click the CVE and then select View affected endpoints.
Learn more about the applications in your network that are impacted by a CVE—Right-click the CVE and then select View applications.
Exclude irrelevant CVEs from your endpoints and applications analysis—Right-click the CVE and then select Exclude. You can add a comment if needed, as well as Report CVE as incorrect for further analysis and investigation by Palo Alto Networks. The CVE is grayed out and labeled Excluded and no longer appears on the Endpoints and Applications views in Vulnerability Assessment, or in the Host Insights widgets. To restore the CVE, you can right-click the CVE and Undo exclusion at any time.
Note
The CVE will be removed/reinstated to all views, filters, and widgets after the next vulnerability recalculation.
To help you assess the vulnerability status of an endpoint, Cortex XSIAM provides a full list of all installed applications and existing CVEs per endpoint and also assigns each endpoint a vulnerability severity score that reflects the highest NIST vulnerability score detected on the endpoint. This information helps you to determine the best course of action for remediating each endpoint. From Assets → Vulnerability Assessment, select Endpoints on the upper-right bar. This information is also available in the va_endpoints dataset. In addition, the host_inventory_endpoints preset lists all endpoints, CVE data, and additional metadata regarding the endpoint information. You can use this dataset and preset to build queries in XQL Search.
For each vulnerability, Cortex XDR displays the following default and optional values.
Value | Description |
---|---|
CVEs | A list of all CVEs that exist on applications that are installed on the endpoint. |
Endpoint ID | Unique ID assigned by Cortex XSIAM that identifies the endpoint. |
Endpoint name | Hostname of the endpoint. TipYou can click each individual endpoint to view in-depth details about it on a panel that appears on the right. |
Last Reported Timestamp | The date and time of the last time the Cortex XDR agent started the process of reporting its application inventory to Cortex XSIAM. |
MAC address | The MAC address associated with the endpoint. |
IP address | The IP address associated with the endpoint. |
Platform | The name of the platform running on the endpoint. |
Severity | The severity level (Critical, High, Medium, or Low) of the CVE as ranked in the NIST database. |
Severity score | The CVE severity score based on the NIST Common Vulnerability Scoring System (CVSS). Click the score to see the full CVSS description. |
You can perform the following actions from Cortex XSIAM as you investigate and remediate your endpoints:
View endpoint details—Left-click the endpoint to view in-depth details about it on a panel that appears on the right. Use the in-panel links as needed.
View a complete list of all applications installed on an endpoint—Right-click the endpoint and then select View installed applications. This list includes the application name, and version, of applications on the endpoint. If an installed application has known vulnerabilities, Cortex XSIAM also displays the list of CVEs and the highest Severity.
(Windows only) Isolate an endpoint from your network—Right-click the endpoint and then select Isolate the endpoint before or during your remediation to allow the Cortex XSIAM agent to communicate only with Cortex XSIAM .
(Windows only) View a complete list of all KBs installed on an endpoint—Right-click the endpoint and then select View installed KBs. This list includes all the Microsoft Windows patches that were installed on the endpoint and a link to the Microsoft official Knowledge Base (KB) support article. This information is also available in the host_inventory_kbs preset, which you can use to build queries in XQL Search.
Retrieve an updated list of applications installed on an endpoint—Right-click the endpoint and then select Rescan endpoint.
You can assess the vulnerability status of applications in your network using the Host inventory. Cortex XSIAM compiles an application inventory of all the applications installed in your network by collecting from each Cortex XDR agent the list of installed applications. For each application on the list, you can see the existing CVEs and the vulnerability severity score that reflects the highest NIST vulnerability score detected for the application. Any new application installed on the endpoint will appear in Cortex XSIAM within 24 hours. Alternatively, you can re-scan the endpoint to retrieve the most updated list.
Note
Starting with macOS 10.15, Mac built-in system applications are not reported by the Cortex XDR agent and are not part of the Cortex XSIAM Application Inventory.
From Incident Response → Host Inventory, select Applications.
To view the details of all the endpoints in your network on which an application is installed, right-click the application and select View endpoints.
To view in-depth details about the application, left-click the application name.